Tekonsha Primus IQ Brake Control 1-3 Axles. In the manual, it says gray is illumination. And I have the Tekonsha Primus IQ. That it's 360° mountable - because I just looked at the owners manual again Tekonsha primus iq electronic brake control - primus, Tekonsha primus iq electronic brake prodigy rf trailer mount electronic brake. The Tekonsha Prodigy P2 is the most advanced brake controller on the market. Lowest Tekonsha brake controller price guaranteed. Same day shipping, thousands of brake controller reviews. Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4.
- Tekonsha 90885 Prodigy P2 Electronic Brake Control User Manual Tool
- Tekonsha 90885 Prodigy P2 Electronic Brake Control User Manual Video
Apr 30, 2014 How to Set Power Output on Tekonsha® Prodigy® P2, #90885 Setting the power output on a Tekonsha® Prodigy® P2 brake control to the trailer you're pulling. 8 Best Electronic Brake Controls. Tekonsha Prodigy P2 Manual Sct Sf3. Tekonsha Primus IQ Trailer Brake Controller # TK90160 Blowing Fuse on The unit turns on but as soon Older Generation Primus Cequent Brake Controller User Manual, More. The Primus IQ, Prodigy P2, and Prodigy P3 are all. Brake control,tekonsha p3 electronic brake control installation,tekonsha. Tekonsha Prodigy P2 (90885) Electronic Brake Control his controller has a boost feature which is handy when loads change. Pulling the single or double PWC trailers does not require any boost, as does the flat trailer when empty.
Electronic brake control, Components of the brake control, De b a
Advertising
Electronic Brake Control
For 2, 4, 6* and 8* brake applications
Components of the Brake Control
A. Power Knob
B.
B.
Manual Slide Knob Canon ef 100-300mm f 4.5-5.6 usm user manual download.
C. Bracket Mounting Holes
D.
D.
Bi-Colored Light
E.
Level Knob
Important Facts to Remember
1.
Do not mount or activate RF generating items (cell
phones, two way radios) near (less than 12') the
Brake Control.
phones, two way radios) near (less than 12') the
Brake Control.
2.
CAUTION Reversing the connection to a break-
away battery on the trailer will destroy
the Brake Control.
the Brake Control.
3.
CAUTION Disconnect trailer plug from the tow
vehicle prior to testing a breakaway switch or you
may destroy the Brake Control.
may destroy the Brake Control.
4.
The light is:
• GREEN when trailer is connected.
• RED when brake pedal or manual is
• GREEN when trailer is connected.
• RED when brake pedal or manual is
activated and trailer is connected.
5.
The GREEN light draws 5 milliamperes of
current from tow vehicle. It would take over 10,000
hours to drain the tow vehicle battery.
current from tow vehicle. It would take over 10,000
hours to drain the tow vehicle battery.
6.
WARNING The level adjustment is CRITICAL.
The level adjustment determines whether automatic
braking response is delayed or aggressive.
braking response is delayed or aggressive.
7.
This brake control is activated by inertia. It
senses deceleration and generates an output
that reflects the inertia sensed. In a stationary
state, the brake control will not apply the
trailer brakes unless the Manual Slide
Knob is actuated.
senses deceleration and generates an output
that reflects the inertia sensed. In a stationary
state, the brake control will not apply the
trailer brakes unless the Manual Slide
Knob is actuated.
8.
WARNING The Gross Combined Weight
Rating (GCWR) must never exceed the vehicle
manufacturers recommendation.
manufacturers recommendation.
Select refrigerators feature a pantry-inspired layout that lets you store more and stay organized. Whirlpool gold french door refrigerator user manual gi6sdrxxq00. We also offer a collection of fridges, beverage centers and other refrigeration appliances that come in a range of sizes, styles and colors that fit your home and lifestyle. Today, Whirlpool® refrigerators continue to offer innovative features that help you and your family keep the day moving. Explore Whirlpool ® refrigerators and find the right model for your kitchenRefrigeration revolutionized food storage when it was first introduced to home kitchens. Whether you’re looking for the latest refrigeration technology or need additional fresh or frozen food storage, we’re here to help you find the best appliances for your family.Browse our home refrigeration collection to find the appliance that’s right for you.
9.
This control specfically designed for use with
electric trailer brakes.
electric trailer brakes.
10. For Technical Assistance and Warranty Information
call: 1-888-785-5832 or www.tekonsha.com
Installation Guide
WARNING The Brake Control must be mount-
ed from -20 degrees nose down to 70 degrees nose
up. (See Below.) Failure to install brake control
within these constraints may cause your control to
become inoperable.
up. (See Below.) Failure to install brake control
within these constraints may cause your control to
become inoperable.
Traditional Bracket Mount
A. Mounting Bracket
B.
B.
#6 x 3/8” Screws
1.
CAUTION Drilling or use of longer screws
may damage unit.
2.
Securely mount bracket to a solid surface.
3.
Insert supplied #6 x 3/8” screws on each side
into the mounting holes.
into the mounting holes.
4.
Adjust control to desired position and tighten
screws until snug.
screws until snug.
READ THIS FIRST:
Read and follow all instructions carefully before
installing or operating the Brake Control. Keep
these instructions with the Brake Control for
future reference.
installing or operating the Brake Control. Keep
these instructions with the Brake Control for
future reference.
Direction of Tr avel
Direction of Tr avel
Correct
Incorrect
D
E
B
A
-20°
0°
70°
A
B
C
P/N 3840
REV J
08/03
Leveling the Sensor
Tekonsha 90885 Prodigy P2 Electronic Brake Control User Manual Tool
After the brake control has been securely mounted
the level adjustment must be set.
the level adjustment must be set.
1.
Connect trailer to tow vehicle, Bi-Colored
Light should glow GREEN.
Light should glow GREEN.
2.
Set power knob to maximum by fully
rotating clockwise.
rotating clockwise.
3.
Depress tow vehicle’s brake pedal and hold.
Tekonsha 90885 Prodigy P2 Electronic Brake Control User Manual Video
4.
Rotate the Level Knob counter-clockwise
(towards the back of the control) until the
Bi-Colored Light starts to change colors
from GREEN to RED.
(towards the back of the control) until the
Bi-Colored Light starts to change colors
from GREEN to RED.
5.
Carefully rotate the Level Knob clockwise
(towards the front of the control) until a
shade of ORANGE is visible.
Bi-Colored Light should show:
• DIM ORANGE for a typical setting.
• BRIGHT ORANGE for an aggressive setting.
• DIM RED for a more aggressive setting.
(towards the front of the control) until a
shade of ORANGE is visible.
Bi-Colored Light should show:
• DIM ORANGE for a typical setting.
• BRIGHT ORANGE for an aggressive setting.
• DIM RED for a more aggressive setting.
6.
Release brake pedal.
Adjusting the Power to the
Trailer Brakes
Trailer Brakes
Once the control has been installed and properly
leveled, it is necessary to set the power needed
to stop the trailer during a braking event.
leveled, it is necessary to set the power needed
to stop the trailer during a braking event.
1.
Connect trailer to tow vehicle.
2.
Set Power Knob to the 12 o’clock position.
3.
Drive tow vehicle and trailer on a dry level
paved surface at 25 mph and apply manual
slide knob.
paved surface at 25 mph and apply manual
slide knob.
NOTE:
Range of adjustment for the level knob
from DIM ORANGE to DIM RED is 20 degrees
of rotation.
of rotation.
✓
If trailer brakes lock up:
❑ Turn power down using power knob.
(Rotate power knob toward the 8 o’clock
position, counter-clockwise.)
❑ Turn power down using power knob.
(Rotate power knob toward the 8 o’clock
position, counter-clockwise.)
✓
If braking was not sufficient:
❑ Turn power up using power knob. (Rotate
power knob toward the 5 o’clock position,
clockwise.)
❑ Turn power up using power knob. (Rotate
power knob toward the 5 o’clock position,
clockwise.)
4.
Repeat Step (3) until power has been set
to a point just below wheel lock up or at
a sufficient force as to achieve maximum
braking power.
to a point just below wheel lock up or at
a sufficient force as to achieve maximum
braking power.
5.
Using the brake pedal, make a few low speed
stops to check the Power and Level adjust-
ments. The automatic response (brake pedal)
is initiated and terminated via the stoplight
switch. When the brake pedal is released,
trailer braking will cease.
stops to check the Power and Level adjust-
ments. The automatic response (brake pedal)
is initiated and terminated via the stoplight
switch. When the brake pedal is released,
trailer braking will cease.
Fine Tuning
Now that the Power has been set, it is time to fine
tune the level setting for the majority of the
stopping that you will be doing.
1.
tune the level setting for the majority of the
stopping that you will be doing.
1.
Make several slow (25 MPH) stops as if
coming up to a stop sign and take notice
of how the trailer brakes respond:
coming up to a stop sign and take notice
of how the trailer brakes respond:
✓
Brakes Grab Too Much
❑ You have an Aggressive Setting:
To correct this condition rotate level knob
clockwise, toward you, see below.
❑ You have an Aggressive Setting:
To correct this condition rotate level knob
clockwise, toward you, see below.
✓
Trailer Tending to Push Tow Vehicle
❑ You have a Delayed Setting:
To correct this condition rotate level knob
counter-clockwise, away from you, see below.
❑ You have a Delayed Setting:
To correct this condition rotate level knob
counter-clockwise, away from you, see below.
2.
Repeat until desired trailer braking is achieved.
A.
Delayed
B.
Normal
C.
Aggressive
NOTE:
When the brake control is leveled
properly there will be very little current flowing
through the brake magnets in a static state with
the foot pedal depressed. The brake magnets will
hum when there is current flowing through them.
Anytime the Bi-Colored Light shows any color
other than GREEN, there is current flowing
through the brake magnets.
through the brake magnets in a static state with
the foot pedal depressed. The brake magnets will
hum when there is current flowing through them.
Anytime the Bi-Colored Light shows any color
other than GREEN, there is current flowing
through the brake magnets.
NOTE:
1. Front of the Voyager must be horizontal,
see below.
This Rebuild Service Is For The 31 Day Time & Strike Clock Movements Made In Korea, Japan, China, etc. Please Note: This Is A Clock Repair Service For You To Send Me Your Clock Movement To Be Rebuilt And Then Returned To You. Please Check My -Frequently Asked Questions- Page Or Contact Me With Any Questions You May Have. Mar 20, 2018 Unlike our cell phones, which magically operate on their own, a 31-day clock must be wound up to continue working. Winding the clock is a simple process, but if you're a bit clueless when it comes to following instructions, you can ruin the delicate gears and springs inside the clock. You may be frustrated because you don't have the time to Google instructions, or are second guessing why you. Bando korea clock 31 day user manual online. Jun 01, 2019 Got a 31 day Korean wall clock with a broken strike spring. I know these guys have very strong and long springs compared to the American and German Clocks that I have been repairing. Can someone guide me to some good references on how best to repair these clocks and especially the steps I need to take to safely remove and replace these 31 day. Ban.do curates and creates products that are meant to make you smile—and, in turn, help you be your best self. Shop clothes, accessories, planners, and more.
2. The Voyager must be parallel to direction
of travel, see below.
NOTE:
1.
WARNING This brake control is activated
by inertia and requires the level to be set
properly, or the braking response will be too
harsh or ineffective.
properly, or the braking response will be too
harsh or ineffective.
2.
To properly level the sensor, the trailer and
tow vehicle must be parked on a level surface
and trailer must be connected to tow vehicle.
tow vehicle must be parked on a level surface
and trailer must be connected to tow vehicle.
A
B
C
Advertising
Popular Brands
Popular manuals